Saft is our preferred battery cell manufacturer for most cells we use to
build battery packs. See following list.
We are also a distributor of battery cells and build battery inserts and
battery packs using Duracell, Enersys, Hawker, Panasonic, Saft, and Sanyo:
Saft VR & VRE Series: Cycling applications lighting, medical,
professional electronics, power tools, home appliances...
Saft VT Series: Permanent charge applications stand by,
back-up, emergency lighting...
Saft VE & VSE Series: Energy and high power applications medical,
professional electronics, telecommunications...
Saft SBL, SBM, SBH: Ni-Cd block battery are suitable for numerous industrial
stationary applications :
Power back-up, Starting, Bulk energy storage
SLM, SPH, & SPL Series: Stationary applications electricity and
general industries, water, oil & gas industry, buildings, hospitals,
airports, boats, road & rail infrastructure
Sunica Plus Solar Series: Ni-Cd Sunica batteries are the renewable energy
solution, typically used in photovoltaic and wind energy electrical storage
applications: navigation aids : offshore and remote lighthouses and beacons,
telecommunications, rail transport, utilities
MRX: MRX battery system has been purpose designed to provide the
perfect high performance on-board battery solution for LRV, metro, EMU,
locomotive and high speed rail systems.
MRX battery has been developed in response to customers seeking even
smaller, lighter battery packages optimized for maximum performance, reduced
maintenance and low life cycle cost.
SRX batteries are designed to answer the specific needs of rail transport in
terms of power, they provide very high level performance, in particular for
starting diesel locomotives and for emergency braking of metros and high
SRX batteries are used where high current discharges are required.
SRX Ni-Cd batteries use sintered/plastic bonded technology plates.
SRM batteries are suitable for numerous rail applications. They are
used for type M discharges (see IEC 60623) i.e. they provide optimal power
for at least one hour.
SRM Ni-Cd batteries use sintered/plastic bonded technology plates.
SCH-S & SCHm-S Ni-Cd single cells are suitable for numerous rail
applications. These batteries use pocket plate technology. The
positive and negative electrodes consist of rectangular perforated steel
pockets that are interlaced and pressed into a base to form a very strong
The NCX battery was designed to meet the requirements of demanding telecom
plants : Outdoor cabinets, Huts & shelters, Controlled Environment Vaults (CEVs),
Indoor racks, Central offices
The Ultima.plus battery was designed to meet the requirements of demanding
telecom plants : Outdoor cabinets, Huts & shelters, Indoor racks, Central
offices, Controlled Environment Vaults (CEV)
STM Series: All-electric vehicles: buses, trucks, compact cars,
minivans, scooters, boats…
Aircraft & Helicopters
VO, VP, VHP, CVH, VXP, CVD, CVK
Ni-Cd batteries are designed to meet the requirements for applications such
as : LEO satellite, Low power GEO satellite
Saft Cell Pricing Guidelines
Contact Us for
specific battery cell specification sheets in a PDF format or any other
needs. Please supply your application and
request data sheet/s.