|
Recelling of Dead Frezzi Batteries, Aftermarket Brick,
With or without the Fuel Gauge
Rebuild
Service and Inserts
for fine Frezzi batteries, nickel cadmium and nickel metal hydride, Screw Together, or other broadcast news,
cinema, film or video batteries after they have died is
our specialty,
including those of defunct companies who frequently close their
doors and then open again under the same or another name. Rathbone Energy, is an SBA
Certified HubZone and Potential tax incentive for your company. Exceeding Industry Standards in Battery Cell Packs
Since 1989!
Click any picture to enlarge
       
BATTERY INSERT COMPONENTS, CELLS, AND PROFESSIONAL PACKAGING OF OUR
PREMIUM SERVICE: The same insert
is used in Logic Digital, Original Non-Digital Logic ProPac and Newer
Non-Digital Logic ProPac. Digital=LCD Screen; Non-Digital=No LCD
screen, and rebuilding aftermarket Frezzi batteries. No amateur work here either. We specify the exact
cells used in black and white on the description and invoice.
First picture is one of our Anton Bauer 2702 with DDM testing stations,
testing, autocal, and charging
different rebuilt Anton Bauer ProPac Logic, Digital ProPac Logic, Hytron 100
Series battery packs to verify proper operation of the completed battery, before we place the enclosure back
together.
This picture is a PAG Pulsar with same type batteries doing a
full diagnostic, discharge, charge, balance, and a recovery program, then to
a stand by status.
Unlike smart chargers, Cadex and PAG analyzers do NOT require
any digital circuitry to analyze and properly charger your
batteries.
If your Anton Bauer Interactive chargers no longer recognize particular
Anton Bauer Logic or Hytron series batteries the battery inserts may still
be good and there is a cost saving resolution. Call for details.
Part Number:
RE-13SK55FZI
Price:
US$167.00 each
FREE
In-bound shipping available, details
(Click to expand)
-
One (1) $10.00 credit for
each Anton Bauer Dionic 90 / 160, Elipze, Hytron 100/120/140 Series, Logic
Digital ProPac or Logic ProPac Battery exchanged against one of our
New Lithium Ion Battery Packs! One (1) $5.00 credit for each
Hytron 50, TrimPac, Proformer, or IDX or Sony BP Professional Camera
Battery. One battery credit per
each new battery purchased.
-
Lithium Ion for Broadcast
We Do NOT use third world or brand name low end
"economical" cells for our premium inserts and rebuilds. We are using the very best nickel cadmium
battery cells available, (exceeding industry standards)
Battery
Cell
specifications.
-
Opening, Building, Installing, Closing:
At Rathbone Energy our professional opening, closing, and
welding technique is a ten part
process.
-
Your battery packs are cleaned.
-
The
Old
Exterior Metal Band is removed, Sandblasted, and given a clean new
Powder Coat Finish. (No so with the non-skid covered enclosure)
-
Old insert is
removed from your back plate and secured for transporting to a battery recycle company.
Cost are incurred for disposal and freight of the old cores.
-
The electrical /
power contacts of your cases are cleaned.
-
New inserts are
built and tested on sophisticated analyzers.
-
Insert is installed
to your back plate and tested.
-
After passing
initial test the open battery is placed on an Anton Bauer InterActive
charger for testing.
-
Then the Exterior
Metal Band that reads something like is again placed back around the
battery case looking better than
when it arrived for recell.
-
The faceplate with
your name or logo and phone number is attached.
-
The battery pack
looks great, performs great, and is then packed and shipped back to you.
-
We receive your
many complimentary letters or emails, which for us, is a great reward.
We make no secret of our professional building process or procedure.
Battery packs are a specialty build product. Important detail information in our
battery facts and FAQ's listed at the bottom of the
page. We are
a small company and have been in business since 1989.
Our cell supplier is >
ISO9000.
Understand Our Procedure
for Opening Your Battery Packs
Proudly Serving
The Broadcast News Industry Since 1989.
If on an outside chance you have found a battery
assembler or a battery pack rebuilder that offers everything we do in:
cell selection, building your battery pack, efforts in safety, detailed black and white
description sheets backed up by detailed manufacturers battery cell
specification sheets, packing slips, and invoices, you have just found
the web site and reason why. rathboneenergy.com, Introducing a Battery
Ethics Standard to Our Industry.
The more you are accurately informed the better you
will appreciate rathboneenergy.com
Battery Chargers
Lithium
Ion Group
Battery Rentals
Rathbone Store: www.rathboneenergy.biz
Blog: www.batteriesandcircuits.com


Last Updated:
Saturday, April 19, 2008 01:28:57 AM
Copyright Rathbone Energy 1991
- 2xxx
|
|