|
Rebuilding of Dead Anton Bauer Battery Belts
Why you should choose Rathbone Energy to
service and rebuild your valuable Anton Bauer Batteries and other equipment is in the
details.
Our Best Value
Nickel Cadmium D Cell for under $350.00!
Using The Durable Sanyo KR5000DEL Battery Cell, Rapid Charge
Rebuild
of fine Anton Bauer batteries or other broadcast news, cinema, film
or video batteries after they have died is
our specialty,
including those of defunct companies who frequently close their doors
and then open again
under the same or another name. Rathbone Energy,
Exceeding Industry Standards In Battery Cell Packs!
First the picture story.
Some pictures may be enlarged with a
click for a cleaner picture. Hoover 3 seconds to read picture text information.
 
The Best Rebuild Value for Your
dead Anton Bauer Battery Belt is our Best Available 120WH nickel
cadmium battery insert and Recell service using the durable Sanyo KR5000DEL Fast Charge
Cell. Rathbone Energy Standards Require Cell Quality
First, Cost Second - And Still The Affordable Alternative, Exceeding Industry Standards In Battery Cell Packs
Since 1989! We lead, the rest follow.
Rebuild Service for your Dead Anton
Bauer 30/13 battery belt:
Part Number:
RE30/13ST55BR Sanyo KR5000DEL
for 165WH
Description: 30/13V, 5.5AH, 120WH, 24 Sanyo
KR5000DEL Fast charge, "D" Press Negative cells,
500 full
charge discharge cycles (CD), handles heat best, most durable, 6
packs of 4 cells in 1x2x2
configuration, manufacturers brand labeled pvc shrink, heat
shrink weld tabs, fiber tubes, fiber top and bottom insulators,
new scratch resistant plastic
Faceplates
with client name and phone number.
Safety
Precautions
Price: US$349.00 each. 12 Month Warranty
.
Have you considered a Ni-MH Conversion?
300WH $678.00 Call.
Insert Kit:
Have you considered a Ni-MH Conversion?
300WH $638.00 Call.
Important information in our battery facts and FAQ's listed at the bottom of the
page. All major brand
Nickel Cadmium
D Cell Specs, (Panasonic, Saft, Sanyo)
These inserts and the Rebuild service for battery battery packs are direct
replacements, built with the specified 5.5AH (@C\1) rate cells,
exceeding industry standard cell packs.
We Do NOT use third world, brand name low end "economical",
"high capacity", or consumer grade battery cells. We are using the very best
nickel cadmium battery cells available, (exceeding industry
standards) and High-Tech Plastic Welders.
Battery Cell:
cell
specifications.
Rathbone Energy, Inc., recommends either the Sanyo
KR5000DEL cell or the Sanyo N4000DRL D cell, (both at C\1 rate
centered positive electrode cells) for best
performance, run time and value!
Sanyo KR5000DEL
$$$$ Best Available High Capacity Amperage, Low Top
Sanyo N4000DRL Specs
$$$$ Excellent Quality, Low Top Cell Must
be used in this battery belt.
$ Brand name but economical, generic, or third world cells,
never our choice.
In the larger amperage F cell belts
Sanyo KR-7000F.pdf
$$$$ Alternative Cell
$ Brand name but economical, generic, third world cells,
never our choice.
Each battery stack is individually
insulated by paper tubes for improved durability against hard bumps
and elevated temperatures.
The integrity of the pack is achieved by
glue (which is injected between each stack) and reinforced tape.
Stacks are interconnected with nickel plated weld tabs for extra
low resistance. When a complete belt insert is ordered, six stacks
are prepared for quick and easy installation into existing
belt carcasses.
The specification charts point out the
cells utilized for extended life and reliability. These belt
inserts were designed to be a very durable and long lasting battery
pack. We can also custom build any pack to your specifications with
several other available cells. For additional information or
questions please email
or call our technical information line.
Table Of Contents, This Web Page File
Ship To Address:
800-223-1775 (Sales)
865-484-1783 (Office and Sales)
865-803-4430 (Verizon In Network with Picture and Text Messaging)
sales@rathboneenergy.com
50+
Important Broadcast Battery FAQ's
-
After 18 years of answering these
important questions,
your question should be answered here.
-
If your questions are not answered in these FAQ,s
please Contact Us
-
After looking over this information you will never
consider the purchase of any other cell or from any other vendor!
-
Considering Rebuilding with a nickel metal hydride?
-
Actually considering batteries with built in
overnight chargers? Battery Crock Pots.
-
You
really need to look over these important FAQ's and battery cell
facts!
-
Read
your cell specs from the manufacturers specification sheets we
have listed in the FAQ's.
-
Turn-around depends on
type of battery: See FAQ's or contact us.
-
Ship your batteries for Recell at any time.
-
Battery Rebuilding Advances To A New Level - Knoxville, TN
-
Why recell your ProPac over Lithium Ion?
If on an outside
chance you have found a battery assembler or a battery pack
rebuilder that offers everything we do in: cell selection, building
your battery pack, efforts in safety, detailed black and white specification sheets,
packing slips, and invoices, you have just found the web site and
reason why.
The more you are accurately informed the more you
will appreciate rathboneenergy.com
 
      
                  
  
(Due to continuing development
all prices & specifications are subject to change without notice).
Copyright Rathbone Energy, Inc.,
1991 - 2xxx, All Rights Reserved.
Last Revised Saturday, April 19, 2008 01:32:16 AM
|
Some
Parts Of This This Web Site," Always Under Construction", and we
continually upgrade. Please Continue
