|
Rebuilding of Dead Chiles Battery Belts
Our Best Value
Nickel Cadmium D Cell for under $350.00!
Using The Fantastic Sanyo KR5000DEL Battery Cell, Rapid Charge
Rebuild of fine Chiles batteries
or other broadcast news, cinema, film or video batteries after they have died is our specialty,
including those of defunct companies who frequently close their doors
and then open again
under the same or another name. Rathbone Energy,
Exceeding Industry Standards In Battery Cell Packs!
First the picture story.
Some pictures may be enlarged with a
click for a cleaner picture. Hoover 3 seconds to read picture text information.
 
PAG Analyzer Chargers for Battery Belt Applications, link at bottom of page.
The Best Rebuild Value for Your dead Chiles Battery
Belt is our Best 165WH nickel cadmium battery insert and Recell
service using the fantastic Sanyo KR5000DEL Durable, High Capacity, Fast Charge
Cell. Nothing else in
Nickel Cadmium comes close! Rathbone Energy, Cell Quality
First, Cost Second - The Affordable Alternative, Exceeding Industry Standards In Battery Cell Packs
Since 1989! We lead, the rest follow.
Rebuild Service for your Dead Chiles
Battery Belt:
Part Number:
RE30/13ST55CHR or RE30P55CHR 30V version
Description: 30/13V, 5.5AH, 165WH, 24 Sanyo
KR5000DEL Fast charge, "D" cells,
500 full
charge discharge cycles (CD), handles heat best, most durable, 4
packs of 4 cells in 1x2x2
configuration, manufacturers brand labeled pvc shrink, heat
shrink weld tabs, fiber tubes, fiber top and bottom insulators,
new scratch resistant plastic
Faceplates
with client name and phone number.
Safety
Precautions
Price: US$339.00 each. 12 Month Warranty
.
Insert Kit:
The Best Available
Nickel Cadmium Cell: 500 Discharge Cycles
Nickel Metal Hydride Cell: 500 Discharge Cycles
Lithium Ion Cell: 500 Discharge Cycles
Have you considered:
Rathbone Lithium Ion Broadcast Batteries from 65WH to 600WH, $195.00 to
$1,980.00, 200WH - $308.00 + Package Deals
Nickel Cadmium battery cells are environmentally
unfriendly. Thanks to
International Environmental Concerns and the good laws of other countries,
our battery cell manufacturers have already started to phase nickel cadmium from their
manufacturing lines. Panasonic did so three years ago. Being an
Environmentally Conscious Company, and Now having our own line of broadcast
battery packs, Rathbone Energy is now phasing nickel cadmium
out as well and expects to be finished by 2010, no longer supporting the rebuild
of Anton Bauer products. Being the only Battery Assembler Worldwide that
supports rebuilding battery packs, we understand that this will create a
hardship on those invested in Anton Bauer nickel cadmium but offer a great
alternative.
Before you have Rathbone rebuild your
battery belt consider what in 2008, we have encountered in parts
accessibility, plus the nickel cadmium issue. As these battery belts
wear with age, parts need to be replaced. In 2008 we were no
longer able to find many important replacement parts for several brand if
not all of these old battery belts rendering the new rebuild useless to the
client. Even though we would like to have the profit, if we
rebuild the pack with fresh, high end battery cells and the packs are
performing at peak, peak is sometimes too much for the worn out parts
and relays. We strongly encourage a new look at our lithium ion
technology.
Important information in our battery facts and FAQ's listed at the
bottom of the page. All major brand Nickel Cadmium
D Cell Specs, (Panasonic, Saft, Sanyo)
We Do NOT use third world or brand name low end "economical" or
consumer grade battery cells.
We are using the very best nickel cadmium battery cells available, (exceeding
industry standards).
Battery Cell:
cell
specifications.
Rathbone Energy, Inc., recommends either the Sanyo
KR5000DEL 5.5AH D cell or the Sanyo N4000DRL D cell, (both at
C\1 rate centered on center cells) for best
performance, run time and value!
Saft VRE D 5500
$$$$$ Best Available, Highest Amperage
Sanyo N4000DRL Specs
$$$$ Excellent Quality
$ Brand name but economical, Generic, Third World cells,
never our choice.
In the larger amperage F cell belts we select
Sanyo KR-7000F.pdf
$$$ Best Available Cell
$ Brand name but economical, Generic, Third World cells,
never our choice.
Each battery stack is individually
insulated by paper tubes for improved durability against hard bumps
and elevated temperatures.
The integrity of the pack is achieved by
glue (which is injected between each stack) and reinforced tape.
Stacks are interconnected with nickel plated weld tabs for extra
low resistance. When a complete belt insert is ordered, six stacks
are prepared for quick and easy installation into existing
belt carcasses.
The specification charts point out the
cells utilized for extended life and reliability. These belt
inserts were designed to be a very durable and long lasting battery
pack. We can also custom build any pack to your specifications with
several other available cells. For additional information or
questions please email
or call our technical information line.
Table Of Contents, This Web Page File
                 
                            | 
