New BP90 Style batteries and inserts from Rathbone Energy, Inc

Why you should choose Rathbone Energy a true and professional battery assembler to service your valuable Anton Bauer Batteries and other equipment is in the details.  But, have you considered Upgrading?

The "BEST AVAILABLE" Battery Cell:

Nickel Cadmium: 500 Discharge Cycles

Nickel Metal Hydride: 500 Discharge Cycles

Our Lithium Ion Choice: 500 Discharge Cycles

Our Position on Nickel Cadmium Batteries and Why We Phased Them Out PDF  You cannot be going Green and still be using Nickel Cadmium Battery Cells.

Our Best Value Nickel Cadmium D Cell for under $230.00!

Using The Sanyo KR5000DEL 5.5AH D Battery Cell, or a Nickel Metal Hydride 10.0AH Version

New battery packs and Rebuilding of fine Anton Bauer batteries, Sony BP Batteries, or other broadcast news, cinema, film or video batteries after they have died is our specialty, including those of defunct companies who frequently close their doors and then open again under the same or another name.  Rathbone Energy, Exceeding Industry Standards In Battery Cell Packs!

First the picture story, then detail.  Some pictures may be enlarged with a click for a cleaner picture.  Hoover 3 seconds to read picture text information.

The Best New BP90, 90 Insert, or Rebuild Value for Your dead Anton Bauer ProPac 90 Battery is our Best 69WH nickel cadmium battery, battery insert and Recell service using the Sanyo KR5000DEL Durable, High Capacity, Fast Charge Cell.

Part Number for your New BP90 Style battery from Rathbone Energy, Inc.:
 

RE-90

Description: 12V, 5.5AH, 68WH, 10 Sanyo KR5000DEL, Fast charge, "D" cells, 500-700 full charge discharge cycles (CD), handles heat best, most durable, 2x2x3 configuration, manufacturers brand labeled pvc shrink, heat shrink weld tabs, fiber tubes, fiber top and bottom insulators, new scratch resistant plastic  Safety Precautions

Price: US$227.00 each.  18 Month Warranty

Raw Insert Price: $135.00 each

Propac Rebuild: $145.00 each

Please specify color

These Rathbone Energy BP-90 units are enhanced replacements for the industry  standard   BP-90 battery pack.

Battery Cell:   cell specifications.

Each battery stack is individually insulated by for  improved durability against hard bumps and elevated temperatures. 

The integrity of the pack is achieved by glue (which is injected between each stack), paper tubes, and reinforced tape. Stacks are interconnected with nickel plated weld straps for extra low resistance. A very reliable internal re-settable fuse eliminates the frustration of having to break the pack apart for fuse replacement, (a tedious replaceable fuse may be substituted at your request but is not recommended). The battery pack is enclosed in a durable thick Kydex plastic case with rounded corners for easy insertion. The case is a light pewter gray to reflect the sun and additional heat.

We use ONLY Sony Brand Power Cords for Best performance and True reliability (No cheap substitutes to reduce cost on any Rathbone Energy battery pack !). The pull ribbon can be custom ordered in any of ten different colors for crew identification. The label, which is recessed to prevent constant scratching, has an area for the stations call letters. The specification charts point out the cells and components utilized for extended life and reliability. These units were designed from the ground up to be a very durable and long lasting battery pack. We can also custom build or rebuild any pack to your specifications. For additional information or questions please call our technical information line. 

Price Structure For:

• Anton Bauer Pro Pac 90 Style

• Hitachi, Ikegami, PAG, Panasonic,

• Sony BP90, Or Any Other Cable Plug Type Battery.

• We have focused our buying power on the Panasonic P500DR Fast Charge 5.5AH Cell

• RE-90P55 12.0V 5.5AH 68.0WH

(Due to continuing development all prices & specifications are subject to change without notice).